Ultra Pump General Video
Ultra Pump Flow Chart
Ultra Pump Specs
Troubleshooting
• Reduced Water Flow
– It may be necessary to clean the filter screen, sponge and impeller.
• Pump Hums and Doesn’t Push Water
– It may be necessary to clean the filter screen, sponge and impeller.
– Remove the water chamber cover and inspect and clean the impeller rotor assembly and internal pump body.
– Make sure nothing is blocking or wrapped around the impeller.
– Make sure the pump is receiving the correct voltage.
• Pump Not Working
– The ground-fault circuit-interrupter (GFCI) may have tripped.
– The pump is not receiving the correct voltage.
Winter Storage
• If concerned about possible freeze damage, disconnect the pump and remove the pump from the water. Clean the pump with fresh water and store the pump in a frost-free location. The pump can be run during cold weather, if desired, but should be removed in the event of a power failure to prevent any freeze damage to either the pump or the tubing.
Please review the Instruction Manual for more in depth troubleshooting.
Ultra-Pump-91005-91006-91007-91008-91009-91010 (1).pdf
If you have questions about these pumps, please Email Us