AquaJet Pump General Video
AquaJet Pump Flow Chart
AquaJet Pump Specs
Troubleshooting
• Reduced Water Flow
– The fountain head itself may be clogged. Shut off the pump, and remove the head for a more thorough cleaning with a garden hose and brush.
– The fountain heads can be thoroughly cleaned, if needed, by taking them apart.
– Pump or plumbing may be clogged. It may be necessary to clean the pump cage screens and impeller
assembly.
– Adjust the diverter valve(s) to set the desired flow to the fountain and/or accessory.
• Pump Hums and Doesn’t Push Water
– Pump or plumbing may be clogged. It may be necessary to clean the pump cage screens and impeller
– Remove the water chamber cover and inspect. Clean the impeller rotor assembly and internal pump body.
– Make sure nothing is blocking or wrapped around the impeller.
– Make sure the pump is receiving the correct voltage.
• Pump Not Working
– The ground-fault circuit-interrupter (GFCI) may have tripped.
– The pump is not receiving the correct voltage.
Winter Storage
•The pump can be run during freezing weather if desired, but should be removed if shutting down the pump for the winter. Disconnect the tubing if using the side discharge fitting and remove the pump and fountain head from the pond. Clean the pump and cage screens with fresh water and store the pump in a frost-free location.
Please review the Instruction Manual for more in depth troubleshooting.
AquaJet™-91014-91015-91016 (1).pdf
If you have questions about these pumps, please Email Us