Statuary Pump General Video
Statuary Pump Flow Chart
Statuary Pump Specs
Troubleshooting
• Reduced Water Flow
– Pump or plumbing may be clogged. It may be necessary to clean the pump intake screen and impeller.
• Pump Hums and Doesn’t Push Water
– Pump or plumbing may be clogged. It may be necessary to clean the pump intake screen and impeller.
– Remove the intake screen and impeller cover and inspect and clean the impeller rotor assembly and internal pump body.
– Make sure nothing is blocking or wrapped around the impeller.
– Make sure the pump is receiving the correct voltage.
• Pump Not Working
– The ground-fault circuit-interrupter (GFCI) may have tripped.
– The pump is not receiving the correct voltage.
Winter Storage
• The pump can be run during freezing weather, if desired, but should be removed if shutting down the pump for the winter. Disconnect the tubing from the discharge fitting and remove the pump from the pond. Clean the pump and inlet screens with fresh water and store the pump in a frost-free location.
Please review the Instruction Manual for more in depth troubleshooting.
Statuary-Pump-Instructions-91023-91024-91025-91026 (1).pdf
If you have questions about these pumps, please Email Us