Overview of AquaGarden Mini Pond Kit
Troubleshooting
• Waterfall is not running properly
– Make sure the outlet is receiving power.
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped.
– Make sure the pump is plugged in and functioning.
– Verify that the pump is properly connected to the filter.
– Verify there is enough water in the container for the pump to operate.
– Clean the sponge filter and low-suction attachment.
• Light won't turn on
– Make sure the outlet is receiving power.
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped.
– Verify that the transformer is functioning properly.
• Make sure the quick-connect fitting is fully connected to the transformer
Overview of AquaGarden Tabletop Fountain Kit
Troubleshooting
Lights are not working
– Make sure the outlet is receiving power
– Make sure the ground-fault circuit interrupter (GFCI) is not tripped
– Verify the controller is securely connected to the transformer
– Make sure the light cord is completely plugged into the controller
– Verify the proper switches are turned to the on position
• Waterfall is not running properly
– Verify there is enough water in the container for the pump to operate
– Make sure the pump is completely plugged into the controller
– Verify the pump is properly connected to the filter
– Clean the sponge filter located at the intake of the pump
– If needed, remove the pump from filter to clean the internal assembly/impeller
If you have questions about this product, please Email Us