Aquascape 2-Outlet and 4-Outlet Pond Aeration Kits provide supplemental aeration for freshwater ponds. The specifications below apply to the 120V AC models.
2-Outlet Pond Aeration Kit — Item #75000
Performance
- Recommended pond capacity: Up to 2,000 gallons
- Number of air outlets: 2
- Maximum loaded airflow: 4,000 cc/min per outlet (8 L/min total)
- Maximum air depth: 8.5 ft. (2.59 m)
Electrical specifications
- Input voltage: 120V AC, 60 Hz
- Power consumption: 6 watts
- Amperage: 0.055 A
- Power cord length: 6 ft. (1.83 m)
Included components
- One 2-outlet aerator pump
- Two 4-inch aeration discs
- Two 25-ft. lengths of airline tubing with pre-installed check valves
4-Outlet Pond Aeration Kit — Item #75001
Performance
- Recommended pond capacity: Up to 3,500 gallons
- Number of air outlets: 4
- Maximum airflow: 3,500 cc/min per outlet (14 L/min total)
- Maximum air depth: 9.2 ft. (2.8 m)
Electrical specifications
- Input voltage: 120V AC, 60 Hz
- Power consumption: 11 watts
- Amperage: 0.1 A
- Power cord length: 6 ft. (1.83 m)
Included components
- One 4-outlet aerator pump
- Four 4-inch aeration discs
- Four 25-ft. lengths of airline tubing with pre-installed check valves
Operating requirements
- Install the aerator pump indoors in a dry location protected from weather, dust, and debris.
- Do not submerge the aerator pump.
- Connect to a properly grounded, GFCI-protected outlet.
- Keep the pump above pond water level to help prevent back-siphoning.
- Both models include a three-year limited warranty against manufacturing defects, subject to the warranty terms and exclusions.
Product documentation
For installation instructions, maintenance, troubleshooting, and warranty details, refer to the 2-Outlet/4-Outlet Pond Aeration Kits Instructions & Maintenance manual.