The Aquascape Pond Powerhead is a submersible circulation pump designed to improve water movement, surface agitation, and aeration in ponds and water gardens. It helps circulate water in stagnant areas and reduce debris accumulation without requiring additional plumbing.
Pond Powerhead — Item #91142
Pump performance
- Maximum flow rate: Approximately 2,000 gallons per hour (GPH)
- Motor type: Magnetic drive (Mag-Drive)
- Flow direction: Adjustable directional head
- Application: Pond circulation, surface agitation, and aeration
Electrical specifications
- Input voltage: 12V
- Operating voltage range: 9–15V
- Frequency: 60 Hz
- Power consumption: 40 watts
- Amperage: 3.33 amps
- Power cord length: 25 feet (7.6 m)
- Power source: Outdoor-rated 12V transformer (sold separately)
Physical specifications
- Dimensions (L × W × H): 9.75 × 5.75 × 5.75 inches (24.8 × 14.6 × 14.6 cm)
- Installation: Fully submersible
- Plumbing connections: None required
- Design: Flat-bottomed base for pond placement
Included components
- Pond Powerhead with integrated adjustable directional head and 25-foot power cord
- Protective outer cage
Operating requirements
- The Pond Powerhead must remain fully submerged during operation.
- Use only in freshwater applications.
- Operate within the specified 9–15V voltage range.
- Use a properly grounded, GFCI-protected electrical supply.
- Do not operate without the protective cage installed.
- The pump is not approved for swimming pools or marine applications.
Warranty
- 3-year limited warranty