Aquascape pond lights can be extended using compatible lighting cables and accessories. The maximum distance depends on the lighting system, cable length, total electrical load, and voltage reaching the fixtures.
Traditional Aquascape Quick-Connect lights and the newer Aquascape x in-lite lighting system have different wiring requirements.
Traditional warm white and color-changing LED lights
Aquascape offers 25 ft (7.6 m) Quick-Connect extension cables for both warm white and color-changing lighting systems.
Warm white LED lights
- 25 ft (7.6 m) Quick-Connect Extension Cable — Item #98998: Extends compatible warm white lighting connections.
- 25 ft (7.6 m) 5-Outlet Quick-Connect Extension Cable — Item #84023: Provides connection points every 5 ft (1.5 m) for multiple lights.
Color-changing LED lights
- 25 ft (7.6 m) Color-Changing Light Extension Cable — Item #84069: Extends compatible color-changing lighting connections.
- 25 ft (7.6 m) 5-Outlet Color-Changing Light Extension Cable — Item #84070: Provides connection points every 5 ft (1.5 m).
Both warm white and color-changing Quick-Connect extension cables can be connected together for longer cable runs.
However, Aquascape does not specify one universal maximum extension distance for these traditional lighting systems. Longer cable runs can cause voltage drop and affect lighting performance.
Aquascape x in-lite lighting system
The Aquascape x in-lite lighting system uses a different low-voltage cable and connection system.
For the in-lite System Cables, Aquascape specifies a maximum distance of 250 ft (75 m) between the transformer and a light fixture.
Available system cable lengths include:
- CBL-80 12/2: 262 ft (80 m)
- CBL-160 12/2: 525 ft (160 m)
Although the cables are available in longer lengths, the maximum specified distance between the transformer and an individual fixture remains 250 ft (75 m).
For compatible Aquascape x in-lite BEAM fixtures, an optional Aquascape x in-lite Underwater Extension Kit provides an additional 3 m (approximately 10 ft) of fixture cord with a protected underwater connection.
Important: The 250 ft (75 m) distance specification applies to the in-lite system cables and should not be used as the maximum extension distance for traditional Aquascape Quick-Connect pond lights.
What should I consider when extending my lights?
- Voltage drop: Longer cable runs may reduce the voltage reaching the lights and affect their performance.
- Transformer capacity: The combined wattage of the connected lights must remain within the transformer's operating limits.
- Cable compatibility: Use extension cables and connectors designed for your specific lighting system.
- Connection protection: Traditional Quick-Connect fittings should remain out of the water. Only use connections specifically designed and rated for underwater installation when submersion is required.
For best performance, position the transformer as close to the lights as practical while following the installation requirements for your lighting system.
Need additional assistance?
If you are planning a longer cable run or are unsure which extension cables are compatible with your lights, please submit a request through our Aquascape Customer Care contact form.
Include your lighting system, transformer model, and approximate cable distance so our team can help determine the appropriate setup.