The pump in your AquaGarden Mini Pond Kit or AquaGarden Tabletop Fountain Kit should be replaced if it stops operating or no longer provides adequate water flow after proper cleaning and troubleshooting. There is no specified replacement schedule; the pump should be replaced when it is no longer functioning properly.
Signs your pump may need replacement
- The pump does not turn on, even though it is properly connected and receiving power.
- Water flow remains weak or stops completely after cleaning the pump.
- The waterfall no longer operates properly despite having sufficient water in the container.
What should I check before replacing the pump?
Before purchasing a replacement pump:
- Check the power supply. Verify that the outlet is working, the GFCI is not tripped, and the pump is properly connected.
- Check the water level. Make sure there is enough water in the container for the pump to operate.
-
Clean the pump.
- AquaGarden Mini Pond Kit: Remove and rinse the sponge filter and clean the low-suction attachment.
- AquaGarden Tabletop Fountain Kit: Clean the pump's intake screen and internal impeller to remove debris or buildup.
- Check the connections. Verify that the pump is properly connected to the waterfall filter.
If the pump still does not operate or provide adequate water flow after these checks, replacement may be necessary.
Which replacement pump do I need?
Each AquaGarden kit requires its specific replacement pump.
- AquaGarden Mini Pond Kit: AquaGarden Mini Pond Pump with Low Suction — Item #78326
- AquaGarden Tabletop Fountain Kit: AquaGarden Tabletop Fountain Pump — Item #78348
Use the replacement pump designed for your specific kit.