A clogged fountain pipe can restrict or stop water flow. Blockages caused by debris can often be removed manually or by backflushing the pipe with a garden hose.
Method 1: Manually remove the blockage
- Turn off and unplug the fountain pump.
- Inspect the pipe for visible debris or obstructions.
- Insert a flexible tool, such as a coat hanger, into the pipe.
- Gently push or pull to dislodge the blockage without damaging the pipe.
- Remove any loosened debris.
For longer pipes, a longer or extendable tool may be necessary.
Method 2: Backflush the pipe with a garden hose
Backflushing uses water pressure to push debris backward through the pipe.
- Turn off and unplug the fountain pump.
- Disconnect the pipe where necessary to allow debris to exit.
- Attach a fitting to a garden hose that reduces the opening to approximately 1/4 in. (6 mm). A fitting designed for an autofill valve works well.
- Insert the reduced end of the hose into the pipe.
- Gradually turn on the water to flush the blockage backward through the pipe.
- Continue flushing until the obstruction is removed and water flows freely.
Avoid excessive water pressure that could damage the pipe or its connections.
What if the pipe is still clogged?
If the blockage remains:
- Disconnect the pipe and inspect it for stubborn debris.
- Check for kinks, crushed sections, or other restrictions.
- Remove any remaining debris before reconnecting the pipe.
- Reconnect the plumbing, restore power, and check the fountain's water flow.
Important: Use caution when inserting tools into fountain plumbing. Excessive force or sharp edges can puncture or damage the pipe.