The AquaGarden Mini Pond Kit and AquaGarden Tabletop Fountain Kit are designed for easy setup. Both kits include a container, filtration system, decorative gravel, and clay grow media for aquatic plants. However, the assembly and electrical connections differ between the two kits.
Follow the instructions for your specific model below.
Setting up the AquaGarden Mini Pond Kit
The AquaGarden Mini Pond Kit can be used indoors or outdoors on a sturdy, level surface.
- Rinse the components. Rinse the container and plant and waterfall filter with fresh water. Separately rinse the clay grow media, mixed decorative gravel, and polished black gravel.
- Position the container. Place the AquaGarden on a sturdy, flat surface to prevent the container from becoming distorted.
- Check the waterfall light. Make sure the pre-installed LED waterfall light is secured by its rubber clips and the light cord is tucked into the designated channel beneath the filter.
- Install the pump. Connect the low-suction attachment to the pump intake using the included flat rubber washer. Attach the pump to the bottom of the filter in the orientation shown in the product instructions.
- Install the filter. Route the pump cord through the rear channel and position the filter securely on the container. Make sure the cords do not prevent the filter from sitting flat.
- Add decorative gravel. Spread the mixed decorative gravel across the bottom of the container.
- Add clay grow media. Place the rinsed clay media into the upper plant filter.
- Add plants (optional). Remove existing soil or fertilizer from the plant roots and gently insert the roots into the clay media. Choose plants that tolerate wet conditions.
- Finish the planting area. Add polished black gravel over the clay media to help hold the plants in position.
- Fill with water. Add fresh water to the container, ensuring the pump is adequately submerged.
- Start the system. Connect the pump and waterfall light transformer to power.
Important: If adding fish, treat chlorinated tap water with an appropriate water conditioner before introducing them.
The AquaGarden Mini Pond Kit pump is designed for continuous operation. Running the waterfall 24 hours a day is recommended to maintain water circulation.
Setting up the AquaGarden Tabletop Fountain Kit
The AquaGarden Tabletop Fountain Kit is designed for indoor use only and includes a pump, waterfall light, overhead plant light, and controller.
- Rinse the components. Rinse the container and filter with fresh water. Separately rinse the clay grow media, mixed decorative gravel, and polished black gravel.
- Position the container. Place the fountain on a sturdy, flat indoor surface.
- Install the filter. Position the plant and waterfall filter onto the container. The pump and waterfall light come pre-attached. Make sure the cords do not prevent the filter from sitting flat.
- Connect the plant light. Insert the overhead plant light into the designated port at the back of the filter.
- Connect the electrical components. Plug the pump, waterfall light, and plant light into their designated ports on the included controller with transformer.
- Add decorative gravel. Spread the mixed decorative gravel across the bottom of the container.
- Add clay grow media. Place the rinsed clay media into the upper plant filter.
- Add plants (optional). Remove soil or fertilizer from the roots and gently place the roots into the clay media. Use small, water-loving plants.
- Finish the planting area. Cover the clay media with polished black gravel to help anchor the plants. Do not overfill the upper filter, as this could cause water to spill over the back.
- Fill with water. Add fresh water to the container, keeping the pump adequately submerged.
- Start the fountain. Connect the transformer to power and use the controller to turn on the pump, waterfall light, and plant light as desired.
Important: The tabletop fountain pump is designed for continuous operation. Running the waterfall 24 hours a day is recommended, but excessive plant-light operation may contribute to algae growth and water-quality issues.
Important electrical and operating precautions
- Keep the pump adequately submerged while operating. Never allow it to run dry.
- Use a properly installed GFCI-protected electrical outlet.
- Never handle electrical connections with wet hands.
- Protect electrical cords from damage.
- Use the AquaGarden Tabletop Fountain Kit indoors only.
- Check the water level regularly and replenish water lost through evaporation.