If you replace your Wi-Fi router, change internet providers, or update your Wi-Fi network name or password, you will need to reconnect your Aquascape Smart Control device using the Aquascape Smart Control App.
Aquascape Smart Control devices require a 2.4 GHz Wi-Fi network and are not compatible with 5 GHz networks or WPA3 security protocols.
How to connect to a new Wi-Fi network
- Connect your smartphone to Wi-Fi. Make sure your phone is connected to the new 2.4 GHz Wi-Fi network.
- Open the Aquascape Smart Control App on your smartphone.
- Open the menu. Tap the three horizontal lines in the upper-right corner of the app.
- Select Add New Device.
- Put your Smart Control device into pairing mode. Follow the pairing instructions for your specific Smart Control Hub, Smart Control Plug, or Smart Pump Receiver.
- Follow the on-screen instructions. When prompted, enter your new 2.4 GHz Wi-Fi network name and password. Wi-Fi passwords are case-sensitive.
- Wait for the device to connect. Once the blue indicator light stops flashing and remains solid, your Smart Control device is connected to the new network.
What if my Smart Control device will not connect?
If your device does not connect to the new Wi-Fi network, check the following:
- Wi-Fi frequency: Confirm that your smartphone is connected to a 2.4 GHz network, not a 5 GHz network.
- Network security: Make sure the router is not configured to use WPA3-only security.
- Wi-Fi password: Verify that the network password was entered correctly, including uppercase and lowercase letters.
- Pairing mode: Confirm that your Smart Control device is in pairing mode before attempting to reconnect.
- Wi-Fi signal: Make sure the Smart Control device is within range of your router and has a reliable Wi-Fi connection.
If you continue experiencing connection problems, submit a request through the Aquascape Customer Care contact form.