You can add additional compatible Aquascape Smart Control devices to your existing Smart Control app by selecting Add New Device and following the pairing instructions. Each new device must be connected to power and placed in pairing mode before it can be added.
How to add another Smart Control device
- Connect the device to power. Plug the new Smart Control device into the appropriate powered outlet or transformer.
- Activate pairing mode. Confirm that the blue Wi-Fi indicator light is blinking. If it is not, follow the device-specific pairing instructions below.
- Open the app. Launch the Aquascape Smart Control app on your smartphone or tablet and sign in to your existing account.
- Open the menu. Tap the menu icon (three horizontal lines) in the upper-right corner of the app's home screen.
- Select Add New Device. Follow the on-screen instructions to connect the additional device.
- Connect to Wi-Fi. Enter your Wi-Fi network information and password when prompted to complete pairing.
Important: Aquascape Smart Control devices require a 2.4 GHz Wi-Fi network for pairing.
How to activate pairing mode
The pairing procedure depends on your Smart Control device.
- Smart Control Hub or Smart Control Plug: Press and hold the pairing button on the front of the device for 10 seconds until the blue Wi-Fi indicator flashes rapidly.
- Smart Pump Receiver: Turn the receiver off using the power button. Press and hold the + and – buttons simultaneously for 4 seconds until the display shows 8888.
For other compatible devices, refer to the Smart Control pairing button guide.
What if the new device does not connect?
- Confirm that the device is receiving power.
- Verify that the blue Wi-Fi indicator is blinking.
- Make sure your smartphone is connected to a 2.4 GHz Wi-Fi network.
- Verify that you entered the correct Wi-Fi password.
- If necessary, repeat the device-specific pairing procedure and attempt to add the device again.
Once pairing is complete, the additional device can be managed through your existing Aquascape Smart Control app.