The Aquascape Smart Pump Receiver can be reset to factory defaults if you are experiencing connection or pairing issues with the Aquascape Smart Control App.
These instructions apply to:
- Smart Pump Receiver — Item #45064
- Smart Pump Receiver Large — Item #45065
How to reset your Smart Pump Receiver
- Disconnect power. Unplug the Smart Pump Receiver from its electrical outlet.
- Reconnect power. Plug the receiver back into the outlet.
- Turn off the receiver. Press the power button and confirm the LCD display is completely blank.
- Press and hold the buttons. Simultaneously press and hold the + and – buttons for 4 seconds.
- Release the buttons. When the LCD display lights up completely and shows 8888, release both buttons.
The Smart Pump Receiver has now been reset to factory defaults.
How to reconnect the receiver to the Smart Control App
- Confirm the receiver's blue Wi-Fi indicator light is blinking, indicating pairing mode.
- Open the Aquascape Smart Control App.
- Select Add New Device from the application's menu.
- Follow the on-screen instructions to complete pairing.
Note: The Smart Pump Receiver requires a 2.4 GHz Wi-Fi network and adequate wireless coverage to connect to the app.
Important: Factory reset vs. circuit breaker reset
The Smart Pump Receiver also has a separate circuit breaker reset button located on the bottom of the unit.
This button protects the receiver from electrical problems, such as pump shorts or excessive voltage. It is not used to restore factory settings.
If the circuit breaker reset button has popped out, the receiver's electrical protection has been triggered. The manufacturer's instructions specify replacing the defective pump before resetting the circuit breaker. Do not repeatedly reset the breaker without addressing the electrical problem.
If you need additional assistance, please submit a request through our Aquascape Customer Care contact form.