The amount of Aquascape water treatment needed depends on your pond's water volume, the treatment being used, and the bottle size. Always follow the dosing instructions on the product label.
How to calculate the correct dosage
Most Aquascape liquid pond water treatments use the following dosing amounts:
- 8 oz (237 mL), 16 oz (473 mL), and 32 oz (946 mL) pump bottles: One full pump treats 100 US gal (378 L).
- 1 US gal (3.78 L) pump bottles: One full pump treats 600 US gal (2,268 L).
These amounts apply to products such as Clean for Ponds, Maintain for Ponds, and Pond Detoxifier.
Example: A 1,000 US gal (3,785 L) pond requires 10 pumps from a bottle that treats 100 US gal (378 L) per pump.
How to calculate your pond's water volume
For a rectangular pond, use the following formula:
Length (ft) × Width (ft) × Average Depth (ft) × 7.48 = Total US gallons
For irregularly shaped ponds, this calculation provides an estimate. Adjust for the pond's actual shape and water volume.
Important dosing information
- Add liquid treatments to an area with good water circulation unless the product instructions specify otherwise.
- Do not exceed the recommended dosage.
- Some treatments require different dosages depending on whether you are performing routine maintenance, adding water, or completing a pond cleanout.
- Specialty treatments, water-soluble packets, and fountain treatments may have different dosing requirements.
- Follow the product's recommended application frequency and water temperature requirements.
Important: Adding more treatment than recommended does not necessarily improve results and may reduce effectiveness. Always check the specific product label before application.