1. Initial Setup or New Treatment Bottle Installation
- Ensure the water treatment system is properly connected and the treatment bottle is securely in place.
2. Activating Priming Mode
- Press and hold the x2 button for 3 seconds.
- A blue light above the x2 button will begin to flash, indicating the system is in priming mode.
3. Priming Process
- Once in priming mode, the system will push the treatment through the tubing.
- The system will remain in priming mode for approximately three minutes, after which it will automatically return to normal operation.
4. Manual Exit of Priming Mode
- You can exit priming mode anytime by pressing the x2 button once the treatment starts discharging at the end of the tubing.
5. Ensuring Proper Priming
- Confirm that the treatment has reached the tubing's outlet.
- Proper priming ensures accurate dispensing of water treatment, helping to maintain a balanced and healthy aquatic environment.
Notes
- Always verify the tubing and connections are free of obstructions.
- If the system doesn't dispense treatment correctly after priming, repeat the process or inspect for issues like airlocks or blockages.
Not all Aquascape products are available in every country. Availability may vary due to regional requirements, local regulations, and other market-specific conditions. In some cases, products may be marketed under different names based on imperial or metric measurements, or due to country-specific product naming regulations and labeling requirements.
To determine which products are available in your region, please visit the product pages specific to your country on the Aquascape website.
For access to Safety Data Sheets (SDS) and additional product documentation, please click here.