You can add koi or goldfish to a newly installed or established pond once the water is properly conditioned and safe for fish. Before introducing fish, check the water quality, ensure the filtration system is operating, and gradually acclimate the fish to their new environment.
Before adding fish to your pond
- Condition the water. Use Aquascape Pond Detoxifier according to the product label instructions to neutralize chlorine and chloramine and help protect fish from harmful substances in tap water.
- Check filtration and aeration. Make sure the pond pump, biological filtration, and aeration or waterfall system are operating properly.
- Add beneficial bacteria. Use Aquascape Pond Starter Bacteria according to the product instructions to help establish beneficial bacteria in a newly installed pond.
- Test the water. Confirm that chlorine has been neutralized and ammonia and nitrite are at safe levels before introducing fish.
- Inspect and quarantine new fish. Check for visible signs of illness or injury. Quarantine new fish in a separate system when possible to reduce the risk of introducing diseases or parasites.
Important: A newly installed pond does not have a fully established biological filtration system. There is no fixed waiting period that guarantees a new pond is ready for fish. Water quality and filtration performance determine when fish can be safely introduced.
How to acclimate new fish to your pond
- Float the transport bag. Place the unopened bag in the pond for approximately 10–15 minutes to help equalize the water temperatures. Keep the bag shaded and out of direct sunlight.
- Gradually introduce pond water. Open the bag and slowly add small amounts of pond water to help the fish adjust to the new water conditions. Avoid leaving fish in an open bag for an extended period.
- Transfer the fish. Carefully move the fish into the pond using a soft mesh net.
- Discard the transport water. Do not pour water from the transport bag into the pond.
Never release fish directly into pond water with a significantly different temperature. Sudden changes in temperature or water chemistry can cause stress or shock.
After introducing fish
- Start with a few fish. Add fish gradually rather than stocking the entire pond at once.
- Allow fish to adjust. Newly introduced fish may hide or remain near the bottom while becoming familiar with their surroundings.
- Delay feeding. Begin feeding on the second or third day after introducing the fish, provided they are behaving normally and water conditions are appropriate.
- Monitor water quality. Regularly test ammonia and nitrite levels, especially during the first several weeks in a newly installed pond.
- Watch for signs of stress. Look for unusual swimming, gasping at the surface, or other changes in behavior.
Adding fish gradually allows the pond's beneficial bacteria population to develop as the biological filtration system adjusts to the additional fish waste. This helps reduce the risk of harmful ammonia and nitrite buildup.