Yes. Logs, stumps, and certain porous rocks can absorb water when first placed in a pond. This may cause a small, temporary decrease in the pond's water level. Once these materials become saturated, they generally stop absorbing additional water.
How logs and stumps absorb water
- Dry wood: Newly submerged logs and stumps absorb water as the wood becomes saturated.
- Wood type and size: Larger, drier, or more porous pieces of wood may absorb more water initially.
- Temporary water loss: Once the wood becomes saturated, additional water absorption is minimal.
Can pond rocks absorb water?
Certain porous rocks, including sandstone and some moss-covered rocks, can absorb small amounts of water when first submerged.
- Water absorption depends on the rock's porosity.
- Most pond rocks absorb very little water.
- Once porous rocks become saturated, they generally stop absorbing additional water.
Other considerations when adding logs or stumps
- Tannins: Submerged wood may release tannins that turn pond water brown or tea-colored. This discoloration is not typically harmful to aquatic life but may affect water clarity.
- Wicking: Wood that extends from the pond into the surrounding soil may transport water outside the pond through a process called wicking. Unlike initial water absorption, wicking may contribute to ongoing water loss.
What should I do if my pond's water level drops?
- Allow newly installed logs, stumps, and porous rocks time to become saturated.
- Monitor the pond's water level to determine whether the decrease continues.
- Check for wood or other absorbent materials extending from the pond into the surrounding soil.
- If the water level continues dropping, investigate other possible causes, including evaporation, splashing, plumbing leaks, and water escaping over the pond liner.
Important: Initial water absorption by logs, stumps, or rocks is usually temporary. If your pond continues losing water, do not assume these materials are responsible. Additional leak investigation may be necessary.