To install an Aquascape polyresin fountain spitter, position the spitter, connect its tubing to a water pump, submerge the pump, and connect power. The pump is sold separately.
- Position the spitter. Place the fountain spitter in your desired location.
- Connect the pump. Connect the spitter’s tubing or pipe to the water pump, then submerge the pump in the water.
- Conceal the tubing. Hide the tubing between the spitter and the pump.
- Start the fountain. Plug the pump into a ground fault circuit interrupter (GFCI) protected receptacle.
For illustrated installation steps and the covered models, see the Polyresin Spitters and Fountains instruction manual. You can find additional product manuals on the Aquascape Owner’s Manuals page.