The Aquascape 60-Watt Low Voltage Quick-Connect Transformer, Item #98486, uses a 7 A, 125 V fast-blow glass fuse measuring 0.20 × 0.79 in. (5 × 20 mm).
Replacement fuse specifications
When selecting a replacement fuse for transformer Item #98486, use the following specifications:
- Fuse type: F7AL fast-blow glass cartridge fuse
- Amperage: 7 A
- Voltage rating: 125 V
- Fuse length: 0.79 in. (20 mm)
- Fuse diameter: 0.20 in. (5 mm)
The replacement fuse must match the required amperage, physical dimensions, fast-blow characteristic, and appropriate voltage and interrupting ratings.
Important: Never replace the fuse with a higher-amperage fuse or bypass the fuse. Doing so may damage the transformer or create an electrical hazard.
What if the replacement fuse blows again?
If the replacement fuse fails, there may be an electrical fault or an issue with the connected lighting system.
- Disconnect the transformer from its electrical outlet.
- Check connected lighting cables and quick-connect fittings for visible damage.
- Verify that the total connected lighting load does not exceed the transformer's 60 W capacity.
- Do not continue replacing fuses if they repeatedly fail.
If the problem continues, submit a request through the Aquascape Customer Care contact form.
Note: These fuse specifications apply only to the Aquascape 60-Watt Low Voltage Quick-Connect Transformer, Item #98486. They should not be used to select replacement fuses for other Aquascape transformer models.