Disconnect the AquaForce pump from its power source before removing it from the protective cage. The cage can be opened for maintenance or to access the pump's internal components.
- Disconnect power to the pump and remove it from the pond. Never lift the pump by its power cord.
- Release the five cage clips by pulling them outward to unlock the upper and lower sections of the protective cage.
- Lift off the upper cage to expose the pump.
- Remove the screws securing the pump restraining bracket.
- Lift the pump out of the lower cage. If additional access is needed, release the power cord from the cage's strain relief.
Reinstalling the pump
- Place the pump back into the lower cage and secure it with the restraining bracket.
- Reposition the power cord in the strain relief.
- Reinstall the upper cage and secure all five cage clips.
Important: Never operate the AquaForce pump without the protective cage properly assembled and secured. Doing so may allow large debris to enter the pump, causing damage and voiding the warranty.
Instruction manual
For additional maintenance instructions and diagrams, download the AquaForce Solids-Handling Pond Pump instruction manual (PDF).