1. Disconnect the Power Source
- Ensure safety by disconnecting the system from its power source before beginning the replacement process.
2. Access the Control Panel
- Open the system enclosure to expose the control panel.
- Identify and note the positions of all wiring or connectors attached to the control panel for accurate reinstallation.
3. Remove the Existing Control Panel
- Carefully disconnect all wiring or connectors from the panel.
- Remove the panel by lifting it upwards and pulling it out of its position.
4. Install the New Control Panel
- Position the new control panel into place.
- Reconnect all previously detached wiring or connectors to their corresponding ports on the new panel.
5. Reconnect Power and Test the System
- Reconnect the power source to the system.
- Test the system to verify that the new control panel is functioning correctly.
Following these steps will ensure a safe and successful control panel replacement.
Not all Aquascape products are available in every country. Availability may vary due to regional requirements, local regulations, and other market-specific conditions. In some cases, products may be marketed under different names based on imperial or metric measurements, or due to country-specific product naming regulations and labeling requirements.
To determine which products are available in your region, please visit the product pages specific to your country on the Aquascape website.
For access to Safety Data Sheets (SDS) and additional product documentation, please click here.