Choose your Smart Pond Dosing System XT setting using your pond’s water volume, treatment bottle size, and treatment concentration. Aquascape’s XT Setting Selector provides the recommended control-panel setting.
Find and enter your setting
- Determine your pond’s water volume. If you do not know it, select Help me calculate in the XT Setting Selector.
- Enter the volume, choosing gallons or liters to match your measurement.
- Select your treatment bottle size: 64 US fl oz (1.89 L) or 1 US gal (3.78 L).
- Select the concentration shown on your treatment bottle: 1X or 3X (extra concentrate).
- Use the + and − buttons on the XT control panel to enter the recommended setting.
The XT controller defaults to setting 1. Check the recommendation before leaving it at the default.
You can also use the downloadable treatment charts on the selector page. Choose the chart matching both your bottle size and concentration. The listed days estimate how long a bottle lasts.
If you use the Smart Control App
If your XT system is connected to the Aquascape Smart Control App, configure the system through the app. The control-panel steps above are for setup without the app.