Disconnect the Power
- Ensure the system is powered off by disconnecting it from the power source.
Access the Internal Components
- Open the system enclosure to expose the internal components.
Remove the Intake Assembly
- Carefully disconnect the tubing and power cable attached to the intake assembly.
- Gently remove the old intake assembly from its position.
Install the New Control Panel
- Position the new control panel in place of the old intake assembly.
- Reconnect the tubing and power cable securely to the new control panel.
Restore Power
- Reconnect the system to the power source.
Prime the System
- Push the treatment through the tubing by priming the system. This can be done by:
- Holding the x2 button for 3 seconds, or
- Using the Smart Control App.
Not all Aquascape products are available in every country. Availability may vary due to regional requirements, local regulations, and other market-specific conditions. In some cases, products may be marketed under different names based on imperial or metric measurements, or due to country-specific product naming regulations and labeling requirements.
To determine which products are available in your region, please visit the product pages specific to your country on the Aquascape website.
For access to Safety Data Sheets (SDS) and additional product documentation, please click here.