No. A ball valve should not be partially closed to control or reduce the flow of an Aquascape PL or PN Series pump.
Aquascape pump instructions state not to block or restrict the pump discharge.
If the pump is producing too much flow:
- Verify that the pump is properly sized for the pond or water feature.
- Consider using a smaller pump that better matches the required flow.
A ball valve may be installed as an isolation valve for servicing the pump or plumbing, but it should remain fully open whenever the pump is operating.
This applies to Aquascape PL and PN Series pumps, including the 3-PL, 5-PL, 9-PL, 8-PN, and 12-PN models.