Yes. You can add biological filter media to your Aquascape BioFalls Filter to increase the surface area available for beneficial bacteria to grow. These bacteria help break down fish waste and other organic pollutants, supporting healthy pond water.
However, do not overfill the BioFalls, as excessive filter media can restrict water movement and interfere with proper filtration.
What biological filter media can I add?
Aquascape recommends using BioBalls Biological Filter Media.
- BioBalls: Provide additional surface area for beneficial bacteria to colonize.
- BioBalls Filter Media Net: Holds loose biological media in place while allowing water to circulate through it.
Biological filter media should be placed in the designated media nets above the existing filter mats.
How much biological filter media can my BioFalls hold?
Aquascape recommends the following minimum BioBalls quantities for its Signature Series BioFalls Filters:
- Signature Series 1000 BioFalls: 100 BioBalls.
- Signature Series 2500 BioFalls: 200 BioBalls.
- Signature Series 6000 BioFalls: 400 BioBalls.
These are the manufacturer's recommended minimum quantities, not maximum capacities. BioBalls are sold separately from the BioFalls Filters.
What should I avoid when adding filter media?
- Do not pack biological filter media tightly into the filter nets.
- Do not overfill media bags, as this can interfere with proper water circulation.
- Do not block or significantly restrict water flow through the BioFalls.
- Do not remove the existing biological filter mats to make additional room for BioBalls.
Important: Adding biological filter media may improve biological filtration, but it does not increase the BioFalls' rated pond capacity or maximum water flow. If your pond requires substantially more filtration, an additional biological filter or wetland filtration system may be necessary.