Preparing your pond for winter helps protect fish, aquatic plants, and equipment from freezing temperatures. Before winter arrives, remove debris, prepare plants, adjust fish feeding, and decide whether to shut down your waterfall or keep it running.
1. Remove leaves and debris
- Remove fallen leaves, sticks, and debris using an Aquascape Pond Skimmer Net.
- Clean the skimmer basket and filter mats as needed.
- Install Aquascape Protective Pond Netting to prevent falling leaves from entering the pond.
- Remove accumulated organic debris before it decomposes and affects water quality.
2. Prepare aquatic plants
- Trim dead or dying foliage from aquatic plants.
- Stop fertilizing plants as temperatures decrease.
- Cut back hardy waterlilies and move their containers to the deeper portion of the pond.
- Remove tropical plants or bring them indoors if appropriate for the species.
3. Prepare pond fish
- Monitor water temperature using an Aquascape Submersible Pond Thermometer.
- Switch to Aquascape Premium Cold Water Fish Food Pellets as fish metabolism slows.
- Stop feeding fish when water temperatures drop below 50°F (10°C).
- Make sure fish have adequate depth to overwinter. In colder climates, a minimum pond depth of 24 in. (61 cm) is generally recommended.
4. Add cold-water beneficial bacteria
Apply Aquascape Cold Water Beneficial Bacteria when water temperatures drop below 50°F (10°C).
Cold-water beneficial bacteria help break down organic waste and reduce debris accumulation during colder months. Follow the product label for application and dosage instructions.
5. Decide whether to shut down your pond
If shutting down the pond:
- Turn off and unplug the waterfall pump.
- Remove the pump and check valve.
- Drain plumbing and equipment that could be damaged by freezing.
- Clean and store the pump in a frost-free location according to the manufacturer's instructions.
If the pond contains fish:
- Install an Aquascape Pond Aeration Kit with the diffuser approximately 12 in. (30 cm) below the water surface, generally on the first pond shelf.
- Position an Aquascape 300-Watt Pond De-Icer toward the center of the pond.
- Keep the aerator and de-icer operating as needed to maintain an opening in the ice for gas exchange.
If keeping the pond running:
- Monitor ice buildup around waterfalls and streams.
- Prevent ice dams from diverting water outside the pond.
- Check the water level regularly and refill as needed.
- Install a pond de-icer as a precaution during extreme freezing conditions when the pond surface could freeze completely.
6. Monitor the pond throughout winter
- Maintain proper water levels as evaporation and ice formation occur.
- Verify that the aerator and de-icer are working properly.
- Make sure an opening remains in the ice when fish are present.
- Never strike or break pond ice with force, as shock waves can harm fish.
- Regularly inspect running waterfalls for ice dams and water loss.
Important: Even when fish become inactive during winter, they still require oxygen and proper gas exchange. Maintaining an opening in the ice is essential for fish survival.