Yes, if you plan to shut down your pond for winter or are concerned about freezing conditions, remove your Aquascape Pond Pump and store it in a frost-free location. If the pond will continue running throughout winter, the pump may remain installed as long as water continues flowing properly and the pump is protected from freezing.
How do I prepare my pond pump for winter storage?
- Disconnect the pump from its electrical outlet before handling or removing it.
- Disconnect the check valve or plumbing assembly and remove the pump.
- Drain any water remaining in the plumbing and check valve to prevent freeze damage.
- Clean the pump, removing debris and buildup according to the manufacturer's maintenance instructions.
- Reassemble the pump and store it in a dry, frost-free indoor location.
Can I leave my pond pump running during winter?
Yes. If you choose to operate your pond pump during winter:
- Regularly check that the pump is functioning properly.
- Make sure ice does not prevent water from reaching the pump.
- Monitor the water level to prevent the pump from running dry.
- Watch for ice buildup that could restrict water circulation.
- If a power outage occurs during freezing conditions, remove the pump to prevent freeze damage to the pump or plumbing.
Important: Aquascape Pond Pumps require a constant, unrestricted water supply. Running the pump dry or allowing water to freeze inside the pump or plumbing may cause damage. Aquascape PL and PN pumps are direct drive pumps and do not use water for lubrication.
Always follow the winterization and storage instructions provided for your specific pump model.