Step 1: Disconnect the Power Source
- Ensure safety by unplugging the power source of the Automatic Dosing System.
Step 2: Remove the Top Cover
- Remove the top cover to expose the underside of the controller.
Step 3: Disconnect the Tubing
- Gently disconnect the tubing from the old cartridge to avoid any damage.
Step 4: Remove the Old Cartridge
- Depress the tabs on the cartridge and pull it out gently to remove it from the system.
Step 5: Install the New Cartridge
- Align the new cartridge properly and insert it into the slot.
- Reattach the tubing securely to the new cartridge to ensure proper flow.
Step 6: Reconnect the Power
- Plug the power source back into the system.
Step 7: Prime the System
- Hold the x2 button for 3 seconds to prime the system and push the treatment through the tubing.
Maintenance Tip
- Regularly replace the cartridge to ensure accurate dosing and maintain optimal system performance.
Not all Aquascape products are available in every country. Availability may vary due to regional requirements, local regulations, and other market-specific conditions. In some cases, products may be marketed under different names based on imperial or metric measurements, or due to country-specific product naming regulations and labeling requirements.
To determine which products are available in your region, please visit the product pages specific to your country on the Aquascape website.
For access to Safety Data Sheets (SDS) and additional product documentation, please click here.