Aquascape Signature Series Pond Skimmers have model-specific replacement parts, including debris baskets, filter mats, weir doors, faceplates, lids, and plumbing components.
Select your skimmer model below to identify the correct replacement part. Parts are not necessarily interchangeable between skimmer models.
Signature Series 200 Pond Skimmer
Skimmer item #43020
Optional brush cartridge — Part #99772
Leaf and debris net — Part #99775
Faceplate — Part #29254
Weir door, 6 in. (15 cm) — Part #29257
Brass screw set, quantity 8 — Part #30078
Optional overflow kit — Part #88036
Bulkhead fitting, 2 in. (51 mm) FPT — Part #29103
The Signature Series 200 uses a debris net rather than the rigid debris baskets found in the larger Signature Series skimmers. The brush cartridge and overflow kit are optional components.
Signature Series 400 Pond Skimmer
Skimmer item #43021
Faux rock lid — Part #43023
Rigid debris basket — Part #43007
Filter mat — Part #43011
Filter mat support rack — Part #43008
Exterior faceplate — Part #43006
Weir door — Part #43005
Brass screw set, quantity 8 — Part #30078
Bulkhead fitting, 2 in. (51 mm) FPT — Part #29103
Hex-head plug, 2 in. (51 mm) MPT — Part #29394
PVC male adapter, 2 in. MPT × 2 in. slip (51 × 51 mm) — Part #29158
PVC male adapter, 2 in. MPT × 1½ in. slip (51 × 38 mm) — Part #29157
The Signature Series 400 uses a rigid debris basket and filter mat. Its faux rock lid, part #43023, is also listed for the Signature Series 1000.
Signature Series 1000 Pond Skimmer
Skimmer item #43022
Faux rock lid — Part #43023
Rigid debris basket, without handle — Part #43009
Debris basket handle — Part #43016
Interior weir plate assembly — Part #43010
Weir door — Part #43013
Filter mat — Part #56000
Filter mat support rack — Part #29655
Exterior liner plate — Part #43014
Hardware bag — Part #43027
Overflow elbow — Part #29149
Water-level adjustment thumb screws, quantity 2 — Part #43015
Hex-head plug, 2 in. (51 mm) MPT — Part #29394
Bulkhead fitting, 2 in. (51 mm) FPT — Part #29103
PVC male adapter, 2 in. MPT × 2 in. slip (51 × 51 mm) — Part #29158
The Signature Series 1000 has an adjustable faceplate and a removable basket handle. Its filter mat (#56000) and filter support rack (#29655) are also listed by Aquascape for the older Signature Series 6.0 and 8.0 skimmers.
How do I identify the correct replacement part?
Confirm whether your skimmer is a Signature Series 200, 400, or 1000.
Match the replacement part number to your exact skimmer model.
For older or discontinued skimmer models, contact Aquascape Customer Care to confirm compatibility before ordering.
For additional product information and replacement-part listings, visit the official Aquascape pages: