The water level inside your Aquascape pond skimmer may become too low because of insufficient pond water, a blocked skimmer opening, a restricted weir door, or excessive debris in the filter basket or mat. Low water levels can prevent proper skimming and cause the pump to operate without sufficient water.
How to fix a low water level inside your skimmer
- Check the pond water level. The recommended pond water level is approximately 3/4 in. (1.9 cm) below the top of the skimmer opening. If the pond level is low, add water until the proper level is restored.
- Inspect the skimmer weir door. Make sure the floating weir door moves freely and is not stuck, closed, or obstructed by leaves, rocks, or other debris. A restricted weir door can prevent sufficient water from entering the skimmer.
- Clean the debris basket or net. Remove accumulated leaves, twigs, and other debris. An overloaded basket or net can restrict water flow to the pump.
- Inspect the filter mat or brush cartridge. If your skimmer has a filter mat or optional brush cartridge, check for excessive debris buildup. Remove and rinse the filter media as needed to restore water flow.
- Check for obstructions near the skimmer opening. Make sure rocks, gravel, plants, or other objects are not restricting water entering the skimmer.
- Check the skimmer's installation height. If the pond water level is correct but the skimmer consistently receives insufficient water, the skimmer may have been installed at the wrong elevation. Correcting the installation height may require repositioning the skimmer.
Additional information for the Signature Series 1000 Pond Skimmer
The Signature Series 1000 Pond Skimmer features an adjustable exterior liner plate that allows minor adjustments to the pond's operating water level.
The recommended water level is approximately 3/4 in. (1.9 cm) below the top of the adjusted opening.
This adjustment is intended for minor corrections. If the desired water level cannot be achieved through adjustment, the skimmer box may need to be repositioned.
If the water level continues to drop
If the water level inside the skimmer remains too low after completing these checks, turn off the pump to prevent it from operating without sufficient water.
If the pond itself is losing water, investigate the cause of the water loss before restarting the system.
For additional assistance, submit a request through the Aquascape Customer Care contact form.